Click image to view full size image
Floating dock fender is the advanced anti-collision device for marine application in the world. Floating dock fenders also known as pneumatic rubber fender or Yokohama type rubber fender, it is often installed on the terminal or ship, which aims to absorb or reduce the collision energy between ship to ship and ship to dock. This kind of product can protect the ship or dock from the damage of collision. With inner compressed air, it can float on the water and widely used as protecting medium equipment.
The pneumatic fenders we offer have excellent energy absorption and low reaction forces, making them ideal for ship-to-ship operations and quick response needs. Lightweight yet strong, they are testament to our innovative approach, combining advanced technology with practical design.
Ship to ship berthing
Accompanied by a large ship, the risk of two ship berthing at sea is also increased, especially when the weather changes, accompanied by wind and waves.Adopt pneumatic fender as side of the buffer, not only make heavy berthing becomes easy, and improve the efficiency of the transportation operations. Floating dock fender is mainly used for: Ice in the Antarctic ocean fishing ships, large oil tanker berthing.
1. Inflatable dock fenders should be installed on a solid deck or on the outside of the hull, and ensure that they are not subject to impact or friction.
2. Before installing the inflatable fender, check whether its appearance is intact and make sure there are no cracks, bubbles, deformation, etc.
3. When installing inflatable fenders, the instructions or drawings provided by the manufacturer should be followed. Special tools and materials should be used to ensure correct installation.
4. When installing inflatable fenders, pay attention to safety to avoid accidents.
Â
The floating dock fender provide protection in both dockside and ship to ship berthing scenarios. We offer a wide range of sizes and they can also be fitted with a tire/chain net for additional protection.
1. Normal size and customized size available. please refer to below sheet.
|
LUHANG Pneumatic Rubber Fenders General Products List |
||||
|
Specifications (mm) |
At 60% compression; |
Fender Boday Weight |
||
|
Initial Pressure is 0.05MPa |
±10% |
|||
|
Diameter |
Length |
Energy Absorption |
Reaction Force |
KG |
|
(KJ) |
(KN) |
|||
|
200 |
500 |
2 |
25 |
6 |
|
300 |
500 |
3 |
32 |
12 |
|
500 |
1000 |
6 |
64 |
25 |
|
600 |
1200 |
10 |
86 |
35 |
|
700 |
1500 |
17 |
137 |
50 |
|
1000 |
1500 |
32 |
181 |
80 |
|
1000 |
2000 |
45 |
257 |
100 |
|
1200 |
2000 |
63 |
297 |
120 |
|
1350 |
2500 |
100 |
426 |
170 |
|
1500 |
3000 |
153 |
579 |
320 |
|
1700 |
3000 |
190 |
637 |
400 |
|
2000 |
3500 |
308 |
875 |
590 |
|
2500 |
4000 |
663 |
1380 |
1000 |
|
2500 |
5500 |
932 |
2010 |
1400 |
|
3000 |
5000 |
1050 |
2030 |
1800 |
|
3000 |
6000 |
1315 |
2488 |
2200 |
|
3300 |
6500 |
1814 |
3015 |
2700 |
|
3500 |
6000 |
2018 |
3286 |
2800 |
|
3500 |
6500 |
2325 |
3656 |
3200 |
|
3500 |
7000 |
2650 |
4018 |
3600 |
|
3600 |
7200 |
3180 |
4821 |
4320 |
|
Remark |
1, Pneumatic Rubber Fenders with initial pressure 0.08MPa also can be supplied. |
|||
|
2, Other sizes besides the above also can be customized. |
||||
|
3, All fenders conform to the latest ISO 17357 directives. |
||||
|
4, All kinds of foam filled marine fenders can be available. |
||||
|
5, Can be delivered in various sizes with chain - vehicle/ aircraft tyre net. |
||||
2. And the customized size are available. You just need to tell us the diameter, length and initial pressure you need.
Â
(1) Maximum energy absorption E;
(2) Reaction force;
(3) Distance requirements after berthing of two ships or the berthing distance from the ship to the dock, including the maximum distance and the minimum distance;
(4) The size of the ship;
(5) Factors such as wind waves and temperature changes in the actual use environment.
Â
Our company specializes in the production of marine rubber fenders and dredging pipelines for many years, and has rich experience in international trade of marine engineering products. We have a number of production lines for rubber fenders and aairbags. A comprehensive range of mold, production equipment and testing equipment can perfectly meet the requirements of our customers.
Our products sell well in North and South America and are recognized by many top companies. We have stable cooperation with a number of international listed companies and have witnessed the prosperity of fender and hose markets in North and South America. We have a team of professionals in North and South America who are familiar with the needs of our customers and can respond to any needs of our customers 24 hours a day.
http://www.marinefloatingfender.com/